Using The Radio For The First Time; Operating Your Radio - Dab; Selecting A Station - Dab - PERFECTPRO DABBOX Mode D'emploi

Using the radio for the first time

1. Place your radio on a flat surface.
2. Straighten up the antenna.
3. Plug the AC power cord into an AC socket. The display will show
"Welcome to Digital Radio" for a few seconds. After short time, the
current time will appear on the display.
4. If no time is displayed, the screen will show "00:00:00". Press the
Power On/Off button to turn on your radio and it will find a DAB
clock radio stations. It may be necessary to relocate your radio to a
position giving better reception and carry out a scan to find stations
as described in later sections.
IMPORTANT:
The mains plug is used as the means of connecting the radio to the
mains supply.
The mains socket used for the radio must remain accessible during
normal use. In order to disconnect the radio from the mains completely,
the mains plug should be removed from the mains outlet completely.
Operating your radio – DAB
1. Straighten the rubber antenna properly which is for both DAB and FM
reception. Press the Power On/Off button to switch on your radio.
2. Press the Source button to select DAB band.
3. If this is the first time the radio is used, a quick scan of Band III DAB
channels will be carried out. If the radio has been used before, the
last used station will be selected.
4. During Autotune, as new stations are detected, the station counter
on the right hand side of the display will increase and stations will be
added to the list. The display shows a bar graph indicating progress
of Autotune.
5. When the Autotune is completed, the first station (in numeric-alpha
order 0...9...A...Z) will be selected.
6. If the station list is still empty after the Autotune, your radio will
display "No DAB Station".
7. If no signals are found, it may be necessary to relocate your radio to
a position giving better reception.
Note:
That radio station name and frequency displays shown in this user
guide may differ from those that you see on your radio. Broadcasters
may change radio station names that are transmitted, and the
frequencies used for DAB and FM radio stations may not be the same
in all parts of the country.
Selecting a station – DAB
1. Press the Power On/Off button to switch on your radio.
2. Press and release the Source button until the DAB mode is selected.
The display will show the name of the radio station currently selected.
3. Rotate the Tuning control knob to scroll through the list of available
stations.
4. Press and release the Tuning control knob to select the station. The
display may show "Connecting..." while your radio finds the new
station.
5. Adjust the Volume control to the required setting.
Note:
If after selecting a station, the station is not found it may be necessary
to relocate your radio to a position giving better reception.
GB
9