Display Modes - Fm; Scan Sensitivity Setting - Fm - PERFECTPRO DABBOX Mode D'emploi

Display Modes – FM
Your radio has a range of display options when in FM mode:
1. Press and release the Info button repeatedly to cycle through the various modes.
a. Radio text displays scrolling text messages such as artist/track name, phone in
number etc.
b. Program type displays type of station being listened to e.g. Pop, Classic, News, etc.
c. Frequency displays the frequency of the station being listened to.
d. Signal strength displays the signal strength for the station being listened to.
e. Time&date displays the current time and date.
Note:
If no RDS information is available, the radio will be unable to display the station name, scrolling
text and program type information.
Scan sensitivity setting – FM
Your radio will normally scan for FM broadcasts which are strong enough to give good reception.
However, you may wish the Auto-scan function to also be able to find weaker signals, possibly
from more distant radio transmitters. Your radio includes "Local" and "Distant" options for the
Auto-scan function.
1. Press the Power On/Off button to switch on your radio.
2. If needed, press and release the Source button until the FM band is selected.
3. Press and hold the Info/Menu button to access FM menu. Rotate the Tuning control knob until
"FM Scan Zone" shows on the display. Press and release the Tuning control knob to enter the
scan sensitivity adjustment mode. The current setting will be marked with an asterisk.
4. Rotate the Tuning control knob to switch between "Local" and "Distant" options on the lower line
of the display. The "Distant" option will allow the radio to find weaker signals when scanning.
5. Press and release the Tuning control knob to confirm your selection. The setting is stored in
the radio and remains in force until changed or until a System Reset.
BBC Radio 2
Playing
1
BBC Radio 2
News
BBC Radio 2
106.50MHz
BBC Radio 2
SGLV
BBC Radio 2
16:41 18-06-2020
GB
13