Brightness Control; Language Selection - PERFECTPRO DABBOX Mode D'emploi

Setting the clock manually
1. With your radio switched on, press and hold the Info/Menu button to
access the menu for the current mode.
2. Rotate the Tuning control knob to select "System Setting" and press
the Tuning control knob to enter the system settings menu.
3. Rotate the Tuning control knob to select "Time". Press the Tuning
control knob to enter the time setting menu.
4. Rotate the Tuning control knob to select "Set Time/Date" and press
the Tuning control knob to enter the setting.
5. Rotate the Tuning control knob to select "Manual" and press the
Tuning control knob to enter the setting. The hour digits will flash on
the display. Rotate the Tuning control knob to set the desired hour.
6. Press the Tuning control knob. The minute digits will flash on the
display. Rotate the Tuning control knob to set the desired minute.
NOTE:
If the radio has been set to use a 12 hour format, there will be an option
here for setting AM or PM for the clock time. Rotate the Tuning control
knob to select AM or PM.
7. Press the Tuning control knob. The day will flash on the display.
Rotate the Tuning control knob to change the day as needed.
8. Press the Tuning control knob. The month will flash on the display.
Rotate the Tuning control knob to set the current month.
9. Press the Tuning control knob. The year will flash on the display
Rotate the Tuning control to set the current year. Then press the
Tuning control knob to confirm the clock setting. The display will
show "Time Saved".

Brightness control

The brightness of the display can be adjusted for when the radio is in
standby and for when it is in use. If you use the unit in the bedroom, you may
prefer a lower standby brightness level than a higher brightness setting.
1. Press the Power On/Off button to switch on your radio.
2. Press and hold the Info/Menu button to access the menu for the
current mode.
3. Rotate the Tuning control knob to select "System Setting" and press
the Tuning control knob to enter the system settings menu.
4. Rotate the Tuning control knob to select "Backlight" and press the
Tuning control knob to enter the setting menu.
5. In Backlight menu, there are 3 settings:
Timeout: to adjust the length of time before the backlight turns off.
On level: to adjust the brightness when the radio is in use.
Off level: to adjust the brightness when the radio is in standby.
Rotate the Tuning control knob to select your option and press the
Tuning control knob to confirm your setting.

Language selection

By default your radio will display all menus and messages in English.
You can choose your preferred language.
1. Press the Power On/Off button to switch on your radio.
2. Press and hold the Info/Menu button to access the menu for the
current mode.
3. Rotate the Tuning control knob to select "System Setting" and press
the Tuning control knob to enter the system settings menu.
4. Rotate the Tuning control knob to select "Language" and press the
Tuning control knob to enter the language adjustment menu.
5. Rotate the Tuning control knob until your desired language appears
on the display. Press the Tuning control knob to confirm your choice.
The display will change to the chosen language. The chosen
language will be marked with an asterisk.
GB
17