Attaching Or Removing Battery Pack - Panasonic EYFEA1N Instructions D'utilisation

Symbol
V
n
o
Revolutions or reciprocations
-1
...min
Electrical capacity of battery
Ah
To reduce the risk of
injury, user must read and
understand instruction
For indoor use only.
III. ASSEMBLY
Attaching or Removing Bit
NOTE:
When attaching or removing a bit,
disconnect battery pack from tool or
place the switch in the center position
(switch lock).
1. Attachment
1 While pulling the bit holder
2 Insert the bit
3 Release the bit holder
②
2. Removal
1 While pulling the bit holder
2 Remove the bit
②
9.5 mm (3/8") - 13 mm (33/64") 6.35 mm (1/4")
EYFEA1N.indb 5
Meaning
Volts
Direct current
No load speed
per minutes
pack
Rotation only
manual.
①
①
- 5 -
Attaching or Removing Bat-
tery Pack
1. To connect the battery pack:
Insert the battery pack firmly into the
main body.
2. To remove the battery pack:
Push on the button from the side to
release the battery pack.
Button
IV. OPERATION
[Main Body]
Switch Operation
1. The speed increases with the amount
of depression of the trigger. When
beginning work, depress the trigger
slightly to start the rotation slowly.
2. A feedback electronic controller is used
to give a strong torque even in low
speed.
3. The brake operates when the trigger
i s r e l e a s e d a n d t h e m o t o r s t o p s
immediately.
NOTE:
When the brake operates, a braking
sound may be heard. This is normal.
2011-3-9 15:16:06