Panasonic EYFEA1N Instructions D'utilisation page 11

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 23
[Information on Disposal in other Countries outside the
European Union]
These symbols are only valid in the European Union. If you wish to discard these
items, please contact your local authorities or dealer and ask for the correct method of
disposal.
Note for the battery symbol (bottom two symbol examples):
This symbol might be used in combination with a chemical symbol. In this case it
complies with the requirement set by the Directive for the chemical involved.
V. MAINTENANCE
Use only a dry, soft cloth for wiping the unit. Do not use a damp cloth, thinner, benzine,
or other volatile solvents for cleaning.
In the event that the inside of the tool or battery pack is exposed to water, drain and
allow to dry as soon as possible.
Carefully remove any dust or iron filings that collect inside the tool. If you experience any
problems operating the tool, please contact your nearest authorised service center.
VI. ACCESSORIES
Use only bits suitable for size of drill's chuck.
VII. APPENDIX
MAXIMUM RECOMMENDED CAPACITIES
Model
Screw
Machine screw
driving
VIII. SPECIFICATIONS
MAIN UNIT
Model
Motor voltage
Low
No load
speed
High
Low
Maximum
torque
High
Clutch torque
Overall length
Weight (with battery pack)
EYFEA1N.indb
11
EYFEA1N
Low : M5
High : M4
EYFEA1N
7.2 V DC
-1
0 - 300 min
(rpm)
-1
0 - 900 min
(rpm)
6.0 N·m (61 kgf-cm, 53.24 in-lbs)
2.0 N·m (20 kgf-cm, 17.75 in-lbs)
Approx. 0.3 N·m (3 kgf-cm, 2.6 in-lbs) –
4.0 N·m (41 kgf-cm, 35.6 in-lbs)
145 mm (5-7/10")
0.63 kg (1.39 lbs)
- 11 -
2011-3-9
15:16:08

Publicité

Table des Matières
loading

Table des Matières