Filter Reset; Storage - Philips AC5659 Mode D'emploi

Filter reset

You can replace filters even if there is
no filter replacement code displayed on
the screen. After replacing a filter, you
need to reset the filter lifetime counter
manually.
1
Touch and
3 seconds to enter the filter reset
mode (fig.€).
» Code (A3) of the NanoProtect
filter True HEPA displays on the
screen.
2
Touch and hold
force reset the filter lifetime counter
of the NanoProtect filter True HEPA
(fig.).
3
Code (C7) of the NanoProtect filter
Active Carbon displays on the
screen after the lifetime counter of
the NanoProtect filter True HEPA
has been reset (fig.‚).
4
Touch and hold
force reset the filter lifetime counter
of the NanoProtect filter Active
Carbon and exit the filter reset
mode (fig.‚).
simultaneously for
for 3 seconds to
for 3 seconds to

7 Storage

1
Turn off the air purifier and unplug
from the wall outlet.
2
Clean the air purifier, air quality
sensor and pre-filter (see chapter
'Cleaning').
3
Let all parts air dry thoroughly
before storing.
4
Wrap the filters and pre-filters
separately in air tight plastic bags.
5
Store the air purifier, filters and pre-
filters in a cool, dry location.
6
Always thoroughly wash hands
after handling filters.
EN 17