Controls Overview (Fig. B ); Get Started; Installing The Nanoprotect Filter - Philips HU5930 Mode D'emploi

Controls Overview
(fig. )
b
Air humidity light ring
K
(HU5931 only)
L Child lock button
M
Timer button
N Fan speed button
O On/off button
P
Humidity level button
Q Temperature button
R Light on/off button
S
Display Screen
T Reset button
6 EN

3 Get started

Installing the
NanoProtect filter
The appliance comes with the
NanoProtect filter fitted inside. Remove
the packaging of the filter before using
the appliance. Remove the NanoProtect
filter, unpack it, and place it back into
the appliance described as follows:
Note
•
Make sure that the side with the tag
is pointing towards you.
•
The pre-filter is fitted inside of the
back panel.
1
Pull the top part of the back panel
towards you to release it from the
appliance (fig. c).
2
Remove the NanoProtect filter from
the appliance (fig. d).
3
Remove all packaging materials of
the NanoProtect filter (fig. e).
4
Place the NanoProtect filter back
into the appliance (fig. f).
5
To reattach the back panel, mount
the panel onto the bottom of the
appliance first, and then push
the top of the panel against the
appliance (fig. g).