Controls Overview (Fig.b); Getting Started; Installing The Filters - Philips AC5659 Mode D'emploi

Controls overview (fig.b)

Control buttons
I Power on/off button
J Light dimming button
K Auto mode button
L Fan speed button
M
Child lock button
N
Reset button
Display panel:
Sleep mode
Speed 1
Speed 2
Speed 3
Turbo mode
Filter replacement alert
Pre-filter cleaning alert
Wi-Fi indicator
Gas display
PM2.5 display
Indoor Allergen Index
General mode
Allergen mode
Bacteria&Virus mode
Child lock indicator

3 Getting started

Installing the filters

Note
• Make sure the air purifier is unplugged
from the electrical outlet before
installing the filters.
• Make sure the side of the filter with the
tag is pointing towards you.
1
Pull the top part of the side panel
to remove it from the the air purifier
(fig.c).
2
Press the two clips down (1) and
pull the pre-filter towards you (2)
(fig.d).
3
Remove all filters (fig.e).
4
Remove all packaging materials
from the filters (fig.f).
5
Place the thick HEPA filter (FY5185)
into the air purifier and then the thin
activated carbon filter (FY5182). The
model numbers are shown on each
filter (fig.g).
6
Attach the pre-filter back into the
air purifier (fig.h).
Note
• Make sure the side with the two clips
is pointing towards you, and that all
hooks of the pre-filter are properly
attached to the purifier.
7
Reattach the front panel by pressing
the top part of the panel onto the
top of the air purifier (1). Then,
gently push the panel against the
body of the air purifier (2) (fig.i).
EN 9