Changing The Auto Mode Setting; Changing The Fan Speed - Philips AC5659 Mode D'emploi

Note
• If the air purifier stays connected to the
electrical outlet after turning OFF, the air
purifier will operate under the previous
settings when turned ON again.
Changing the Auto mode
setting
You can choose the Allergen mode
( ), the General mode (
Bacteria & Virus mode (
Allergen mode
The extra-sensitive allergen mode
is designed to react to even a small
change in allergen levels in the
surrounding air.
•
Touch the Auto mode button
select the Allergen mode (fig.l).
» Auto (
) and
screen.
General mode
A smart auto-setting that automatically
adjusts the air purifier's settings to the
ideal level.
•
Touch the Auto mode button
select the General mode (fig.m).
» Auto (
) and
screen.
Bacteria & Virus mode
The bacteria & virus mode boosts the
airflow to quickly reduce bacteria &
viruses.
• Touch the Auto mode button
select the Bacteria & Virus mode
(fig.n).
» Auto (
) and
screen.
12 EN

Changing the fan speed

In addition to the Auto modes, there are
several fan speeds available.
When using the manual fan speed
settings, the purifier will still monitor the
air quality, but it will not automatically
adjust the fan speed if it detects changes
in the air quality.
Sleep mode (
In sleep mode, the air purifier operates
quietly at a very low speed.
)or the
).
•
Manual
to
•
display on the
• If the air quality light lights up blue, it
to
display on the
to
display on the
)
Touch the fan speed button
select the sleep mode (SL) (fig.o).
» The "
" displays on the screen.
» The sleep mode indicator
on.
Touch the fan speed button
repeatedly to select the fan speed you
need (fig.p):
(Speed 1)
(Speed 2)
(Speed 3).
Tip
indicates that the air quality is good,
and you can select a lower fan speed.
On the other hand, if the air quality light
lights up red-purple or red, it indicates
that the air quality is unhealthy, and you
can select a higher fan speed to purify
the air more quickly.
to
goes