Setting The Humidity Level; Changing The Fan Speed; Setting The Timer - Philips HU5930 Mode D'emploi

Setting the humidity
level
1
Touch the humidity button
repeatedly to set the desired air
humidity to 40%, 50% or 60%
(fig. u).
Note
•
When the humidity level "
chosen, the humidity light ring will
be off. The appliance will keep
humidifying the room until the
ambient humidity level reaches
70%RH.
•
In the auto mode, the appliance will
operate under fan speed 1 when the
target humidity level is reached. In
the manual fan speed mode, the
appliance will continue to operate
under the chosen fan speed.
•
When the target humidity level is
reached, the wick wheel will stop
rotating. It will start rotating again
when the humidity drops below the
target level.
•
If you want to increase the humidity
level quickly, you can select a
higher fan speed.
•
For HU5931, the air humidity light
ring indicates whether the target
humidity level is reached. It lights
up blue when the humidity level is
reached and red when the ambient
humidity is below the preset setting.
8 EN

Changing the fan speed

Auto ( )
In auto mode, the appliance selects
the fan speed in accordance with the
ambient air humidity.
1
Touch the fan speed button
select auto (
Manual
" is
1
Touch the fan speed button
repeatedly to select the desired fan
speed (1, 2, 3 or 4) (fig. w).
Note
•
Fan speed 4 is available for HU5931
only.

Setting the timer

With the timer, you can let the
appliance operate for a set number of
hours. When the set time has elapsed,
the appliance will automatically switch
off.
1
Touch the timer button
repeatedly to choose the number
of hours you want the appliance to
operate (fig. x).
» The timer is available from 1 to
To deactivate the timer function, touch
the timer button
displays on the screen (fig. y).
) (fig. v).
8 hours.
repeatedly until
to