Deltaplus TC013 Mode D'emploi page 10

1. Technical data
Manufacturer:
Line:
Certification:
Maximum descent height:
Maximum descent load:
Minimum descent load:
Maximum ambient temperature:
Minimum ambient temperature:
Maximum lifting capacity:
Maximum lifting height:
Producer tested loads:
Max. height / load on descent:
Max. height / load on descent:
Descent velocity:
Calculation of descent energy:
2. Application
The TC013 rescue device for descending and lifting are rescue devices by means of which one
person or two persons simultaneously or several persons one after the other are able to descend
vertically from a higher to a lower place at limited velocity. In addition, a person can be lifted vertically
from a lower to a higher place by a rescuer or a rescuer can approach a casualty, collect that person
and descend with the casualty.
The equipment may only be used within the limits of the defined conditions of use and for its intended
use. The TC013 rescue device for descending and lifting may only be used as rescue system and
not as fall arrest system. The device can be used in vertical, horizontal and inclined position The
position depends on the particular use.
Vertical position : device is hanging vertically on an anchor point.
Horizontal position: f.e. For rescue from a platform Inclined Position: f.e. Device attached with an
adapter on a tripod.
Instructions for use
Delta Plus Group - B.P. 140 Z.I. La Peyrolière
Product:
Type:
Ma n u f a c t u r e r ' s sheathed core rope Ø 9 mm and Ø 10,5
mm -
EN 1891:1998
Weight: 61 g/m (Ø 9 mm) / 71,5 g/m (Ø 10,5 mm)
Elongation: 4,2% (Ø 9 mm) / 3% (Ø 10,5 mm)
Material: polyamide
EN 341:2011/1A (100 kg) /1B (200 kg)
EN1496:2006 Class B
160 m
200 kg
50 kg
60° C
-40° C
200 kg
30 m
48 x 160 m, max. 100 kg
5 x 160 m, max. 200 kg
0,8 m/s at loads up to 100 kg. Increasing speed is to be expected
as load is increased (2,0 m/sec.)
W=m g h
x x x
m descent load (kg),
g acceleration of free fall (9,81 m/s
h descent height (m), n number of descent
class A W=7,5 x 10
TC013 TC014
Descender device with lifting function
T C 0 1 3
n
2
)
6
J / class B W=1,5 x 10
UPDATE : 20.01.2016
EN
–
84405 APT - France
6
J
10/31