Publicité
Les langues disponibles
Les langues disponibles
■
Do not use the product if the electric cables are
damaged or worn.
■
If the power cord or extension cable becomes
damaged during use, disconnect from the power supply
immediately. Do not touch the electric cables until the
power supply has been disconnected.
■
Make sure the power cord is positioned so that it
cannot be damaged by the cutting means and will not
be stepped on, tripped over, or otherwise subjected to
damage or stress.
■
Never pick up or carry the product by the electric cable.
■
Never pull by the power cord to disconnect from the
power supply.
■
Keep the power cord away from heat, oil and sharp
edges.
■
Make sure voltage is correct for your product. A
nameplate on the product indicates the product's
voltage. Never connect the product to an AC voltage
that differs from this voltage.
■
Make sure the switch is in off position before
disconnecting from power supply.
BATTERY TOOL USE AND CARE
■
Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one type of
battery pack may create a risk of fire when used with
another battery pack.
■
Use power tools only with specifically designated
battery packs. Use of any other battery packs may
create a risk of injury and fire.
■
When battery pack is not in use, keep it away from
other metal objects, like paper clips, coins, keys, nails,
screws, or other small metal objects, that can make a
connection from one terminal to another. Shorting the
battery terminals together may cause burns or a fire.
■
Protect the battery pack against moisture and water.
Do not charge the battery in a damp or wet location.
Following this rule will reduce the risk of electric shock.
■
Do not leave the battery pack in a vehicle or outdoor
storage during hot or cold conditions.
■
Do not incinerate the battery. When the battery is
beyond its useful life, dispose of it correctly according
to the local regulations in your area.
■
Under abusive conditions, liquid may be ejected from
the battery; avoid contact. If contact accidentally occurs,
flush with water. If liquid contacts eyes, additionally
seek medical help. Liquid ejected from the battery may
cause irritation or burns.
LAWN TRIMMER/EDGE TRIMMER SAFETY
WARNINGS
■
Never allow children or people unfamiliar with the
instructions to use the product.
■
Use the product in daylight or with good artificial light.
■
Avoid using on wet grass.
■
Do not walk backwards when using the product.
■
Keep firm footing and balance. Do not overreach.
2
| English
Overreaching can result in loss of balance. Always be
sure of your footing on slopes. Walk, never run.
■
Keep bystanders, children, and pets 15 m away from
the area of operation. Stop the product if anyone enters
the area.
■
Keep the cutting attachment below waist level.
■
Never use the product with damaged guards or without
guards in place.
■
Never fit a metal replacement line.
■
Keep hands and feet away from the cutting means at all
times, especially when switching on the motor.
■
Beware, the cutting means continue to rotate after the
motor is switched off.
■
Beware of objects thrown by the cutting means. Clear
debris like small stones, gravel, and other foreign
objects from the work area before starting operation.
Wires or string may become entangled with the cutting
means.
■
Switch off and disconnect from the power supply before:
●
servicing
●
leaving the product unattended
●
cleaning your product or clearing a blockage
●
changing accessories
●
checking for any damage after hitting an object
●
checking for any damage if the product starts to
vibrate abnormally
●
performing maintenance
■
The small blade fitted to the safety guard is designed to
trim the new extended line to the correct length for safe
and optimum performance. It is sharp; do not touch it,
particularly when cleaning the product.
■
Always ensure that ventilation openings are kept clear
of debris.
■
Make sure the cutting head attachment is properly
installed and securely fastened.
■
Make sure all guards, deflectors, and handles are
properly and securely attached.
■
Do not modify the product in any way. This may
increase the risk of injury to yourself or others.
■
Use only the manufacturer's replacement cutting line.
Do not use any other cutting attachment.
■
Immediately switch off and disconnect from the mains
or remove the battery pack in the event of accident or
breakdown. Don't operate the product again until it has
been fully checked by an authorised service centre.
■
Ensure that the line cut-off blade in guard is properly
positioned and secured before each use.
TRANSPORTATION AND STORAGE
■
Stop the product and allow it to cool down before
storing or transporting.
■
Clean all foreign materials from the product. Store it in a
cool, dry, and well-ventilated place that is inaccessible
to children. Keep away from corrosive agents, such
as garden chemicals and de-icing salts. Do not store
outdoors.
Publicité
