Technical Data - HASE Luno Manuel D'utilisation

11. Technical Data

The Luno B.13, certified in compliance with DIN-EN 13240 und Art. 15 a B-VG
(Austria), can only be operated when the fire box is closed. Conforms with the DIBt
(Deutschen Institut für Bautechnik/German Institute for Building Technology) approval
criteria for direct vent fireplaces for solid fuels. Multiple connections to the chimney
are possible, see point 4. "Connection of Multiple Devices in Direct Vent Operation".
VKF-No.: 24259; DIBt approval number: Z-43.12-341. / Typ FC41x und FC51x
The following data applies to the chimney characteristics in accordance with EN
13384-1 /-2:
Combustion Values
Nominal Thermal Output
Efficiency
Particulate
CO content at 13% O2
Waste Gas Mass Flow Rate
Waste Gas Outlet Temp.
Min. Supply Pressure at Nominal Thermal Output
Min. required combustion air volume
Depending on the insulation of the building, the nominal thermal output of 5,5 kW
indicated on 17 bis 68 m² (subject to change).
Dimensions: Height
Stove 115,5 - 119,5 cm
Fire box 36 cm
Weight (Steel/Ceramic/Natural stone)
* Vertical flue pipe length
Flue pipe diameter
Pipe diameter of Hase air system*
* For separate air supply in low-energy houses and insufficient combustion air supply in the
room where the stove is installed.
Wood
5,5 kW
80,2 %
15 mg/m³
809 mg/m³
5 g/s
310 ˚C
12 Pa
21 m³/h
Width Depth
51 - 54,5 cm 44,5 cm
33 cm 29 cm
123/139/170 kg
min. 25 cm
15 cm
10 cm
Front view
Ceramic/Natural stone:
54,5
Top view
Ceramic/Natural stone:
Side view
Ceramic/Natural stone:
Inst. of Hase air system
below: 18,5
Dimensions in cm
41