Basic Information; Appropriate Use; Obligation And Liability; Operator Obligations - Wessamat W 21 L Mode D'emploi

1. Basic information

These operating instructions are intended to familiarise the ice cube maker operator with its functions, safety
instructions and cleaning procedures.

1.1 Appropriate use

The ice cube maker is a technical medium, which is intended for work use only.
The ice cube maker is exclusively intended for the production of ice cubes from hygienically clean drinking
water. Appropriate use particularly includes compliance with all instructions contained in the operating
instructions.
Any other use requires written approval from the manufacturer. Inappropriate use may create certain risks.
Inappropriate uses includes the production of ice cubes from a different substance than drinking water.

1.2 Obligation and liability

1.2.1 Operator obligations

A prerequisite for safe and trouble-free operation of this ice cube maker is knowledge of and compliance with
the safety instructions and safety regulations. This operating instructions - especially the safety instructions -
must be heeded by all persons operating the unit. In addition, all locally applicable rules and regulations
governing the prevention of accidents must be heeded.

1.2.2 Warranty and liability

For warranty and liability, our "General terms and conditions" apply (issued 02.11.2010). Warranty and liability
claims for personal injury or damage to property are excluded, if they were caused by one or more of the
following:
•
inappropriate use of the machine;
•
improper assembly, commissioning, operation and maintenance of the machine;
•
machine operation with safety devices that are faulty, incorrectly installed or non-functioning;
•
failure to observe the instructions in the operating instructions regarding transport, storage, assembly,
commissioning, operation and maintenance of the machine;
•
unauthorised modifications of the machine;
•
inadequate monitoring of machine components that are subject to wear;
•
improper repairs;
•
cleaning and maintenance not carried out regularly;
•
external influence or force majeure.

1.2.3 Modifications

This machine must not be modified without prior written approval from the manufacturer, also removal or
addition of parts is not allowed !!
Machine components that are not in faultless condition must be replaced. Only use original spare parts. Third-
party parts cannot be guaranteed to be designed and manufactured to meet the operational and safety
requirements. Non-compliance with these instructions will void the manufacturer's warranty !!

1.3 Conformity

See declaration of conformity at page 3.
27
E
N
G
L
I
S
C
H
E
N
G
L
I
S
H
A
N
G
L
A
I
S