General Conformity Declaration - Becker Centronic SunWindControl SWC545-II Notice De Montage Et D'utilisation

The system does not
extended manually
when the sliding switch
is set to "" or "".
General conformity declaration
Becker-Antriebe
SunWindControl SWC545-II complies with the basic requirements and other
relevant regulations of the EC Directive R&TTE 1999/5/EC.
For use in the following countries: EU, CH, NO, IS, LI
Subject to technical changes without notice.
1. Wind speed exceeds
threshold value.
2. Sensory equipment
or sensory equipment
connection defective.
3. Winter setting is set to
ON.
GmbH hereby
1. Wait until wind abates.
2. Check the sensory
equipment.
3. Winter setting is set to
OFF.
declares that the device Centronic
51
de
en
fr
nl