Becker Centronic SunWindControl SWC545-II Notice De Montage Et D'utilisation page 44

Assembly and Operating Instructions
SETTING
SUN INTERMEDIATE POSITION, SUN FABRIC TENSION / TILT, SUN END POSI-
TION
1. You have confirmed the menu option TIME END POSITION. SUN INTERMEDI-
ATE POSITION appears.
2. Use the +/- button to choose between SUN INTERMEDIATE POSITION, SUN
FABRIC TENSION / TILT, SUN END POSITION.
3. Press OK to confirm your selection.
4. The LIGHT INTERM POS function is now set.
Note
This function allows you to select the position into which the awning/
venetian blind will be moved if the threshold value is exceeded.
5. For further programming options in the SETTING menu refer to the next sec-
tion.
44