Becker Centronic SunWindControl SWC545-II Notice De Montage Et D'utilisation page 43

SETTING
WIND MONITORING, TIME END POSITION, TIME INTERM POS, TIME FABRIC
TEN/TILT
1. You have confirmed the menu option WINTER OFF/ON.
WIND MONITORING appears.
2. Use the +/- button to adjust the wind setting.
3. Press OK to confirm. TIME END POSITION appears.
4. Use the +/- button to choose between TIME END POSITION, TIME INTERM
POS, TIME FABRIC TEN/TILT.
Note
This function allows you to select the position into which the awning/
venetian blind will be moved when the pre-set time is reached.
5. Press OK to confirm your selection.
6. The TIME END POSITION function is now set.
7. For further programming options in the SETTING menu refer to the next sec-
tion.
WIND
MONITORING
FABRIC TEN/TILT
TIME
END POSITION
TIME
INTERM POS
TIME
de
en
fr
nl
43