Becker Centronic SunWindControl SWC545-II Notice De Montage Et D'utilisation page 33

Operating Mode
The current wind or sunlight value or the time can be seen on the display.
OK Button
Press OK to store the values currently on display.
+/- buttons
The following operations are possible using the + and - buttons:
• Menu -> change value
• Auto mode -> request information:
• + button -> next automatic switching time s
• - button -> next automatic switching time t
MENU button
By pressing the MENU button, you can see an overview of the menu or the op-
erating mode.
The currently displayed values are not stored.
RESET button
Press the RESET button (with a ballpoint pen or similar object) to restore the
device's factory settings SWC545-II.
Exception: Function and language selection menu.
Time/date menu
TIME/DATE
This menu is used to set the time and the date.
de
en
fr
nl
33