Inserting/Removing The Battery; Warning, Precautions - Wayscral TAKEAWAY E-200 Notice D'utilisation

•
the tyre inflation
•
the wind
•
the pedalling effort provided
•
setting off and the frequency of stops
•
the outside temperature.
IV.

Inserting/removing the battery

On electric bikes, the battery is located in a case beneath the seat and
is directly connected to the control box at the front.
WARNING: before handling the battery, make sure the
switch is in the off position.
Battery installation: slide the battery into position all the way into the
case.
Locking the battery: to lock the battery inside its case and prevent it
from being stolen or lost, insert the key into the lock on the side, and
turn it clockwise. Unlock it again with a half-turn anti-clockwise.
WARNING: ensure that the key is removed and kept in a
safe place.
V.

Warning, precautions

It is recommended that the battery is charged regularly, or after each
use. Like the batteries in your mobile phone, these batteries do not
have a charge memory. In order to maximise the life of your battery, it
is nevertheless advisable:
•
to avoid hot places (ideal charging temperature: 20°C)
•
allow the battery to cool down 30 minutes after using the
bicycle.
74
EN