Wheel And Engine; Luggage Rack; Kickstand - Wayscral TAKEAWAY E-200 Notice D'utilisation

9. Wheel and engine

After the first month of use, it is advisable to tighten the spokes of the
wheels to limit the impact of engine traction on your rear wheel. A slight
noise may be heard when the engine is started. This noise is normal
because the engine starts and assists pedalling. This noise can
become louder when in full use.

10. Luggage rack

Your bicycle is sold with a luggage rack:
Model
TAKEAWAY E-200
It is already fixed above your rear wheel. The fixing elements must be
tightened and checked regularly at a torque of 4 - 6 Nm. Your luggage
rack is designed for a maximum load of 25 kg and a child seat can be
attached to it.
WARNING: your luggage rack is not designed to pull a
trailer.
For safety reasons, luggage must only be carried on the luggage rack.
Warning: when the luggage rack is loaded, the bearing of your bicycle
changes. Spread the luggage load equally on both sides to help keep
your bicycle stable. All luggage must be firmly secured before each
use. It is important to check that nothing is hanging down or at risk of
becoming caught in the rear wheel of the bicycle. Do not make
modifications to the luggage carrier; any modification of the luggage
carrier by the user will invalidate these instructions. Luggage should
not obscure the reflectors and lights on your bike.

11. Kickstand

Before each use, check that your kickstand (20) is folded up. The
kickstand has a locking system which is deactivated with a press of the
foot.
Bike size
20"
65
Luggage rack
XJ-20-LC148
EN