Selecting The Assistance Level On The Led Display - Wayscral TAKEAWAY E-200 Notice D'utilisation

DISPLAY
4 LEDs on
3 LEDs on
2 LEDs on
1 LED on
1 LED flashing
If the user forgets to turn off the power after 5 minutes of inactivity, the
four LEDs will light up one after the other to remind the user to turn off
the power and save energy.

4. Selecting the assistance level on the LED display

When the power is on, you can choose between 6 assistance levels.
Press the "+" or "-" buttons to select one of these six assistance levels.
When the power is on, the "LOW" assistance LED lights up
continuously, which means that the assistance is at level 1. To increase
the level, press the "+" button, to decrease it, press on "-".
LED DISPLAY
◌ ◌ ◌
◌ ◌ ◌ ↔ ● ◌ ◌
● ◌ ◌
◌ ◌ ◌ ↔ ◌ ● ◌
◌ ● ◌
◌ ◌ ◌ ↔ ◌ ◌ ●
◌ ◌ ●
•
By selecting a high assistance level (5 and 6), the battery usage
will be increased and the effort needed from the user will be
lower. These levels are suitable for slopes, headwinds or heavy
loads.
•
Medium assistance levels (3 and 4) mean that the user effort
and battery usage are equal.
•
The low assistance levels (1 and 2) mean that the propulsion of
the bicycle comes more from the effort of the user than from the
CHARGE LEVEL
100%
The battery is dead and requires
immediate charging.
ASSISTANCE LEVEL
Assistance disabled
71
75%
50%
25%
1
2
3
4
5
6
EN