Activate / Deactivate The Lcd Display; Displaying The Battery Charge On Lcd Display - Wayscral ANYWAY E-300 Notice D'utilisation

As well as the remote control box:
SET: menu / choose trip information
The control box is also equipped with a 5V USB charging socket.
2.

Activate / deactivate the LCD display

To activate the assistance press "ON/OFF" on the control box once. The icons on the LCD monitor will
come on. Once the display is on, a simple press on the "ON/OFF" button turns the bicycle's back-light
and lights on and off.
To turn off the assistance press and hold the "ON/OFF" button for 3 seconds. The icons and LCD screen
back-light will go off.
3.

Displaying the battery charge on LCD display

Under normal conditions, turn on the power and the battery indications show the charge level and the
current battery voltage.
When all segments are lit, it means that the charge is at maximum level. If the last one is flashing, it
means that the battery must be recharged immediately before using the bicycle.
DISPLAY
+: increase
ON/OFF
-: reduce
<->
CHARGE LEVEL
100%
The battery is flat and needs to be charged
immediately.
55
80%
60%
40%
20%