Regular Checks; Revisions - Wayscral ANYWAY E-300 Notice D'utilisation

III.

Regular checks

Concerning the tightening of the bolts: lever, crank, pedals, brackets.
The tightening torques to apply are as follows:
COMPONENTS
Pedals on crank arms
Crank arm on bracket
Stem/handlebar tightening
Headset tightening
Brake lever
Brake callipers
Seat
Seat post clamp
Wheel
The other tightening torques depend on the nut sizes: M4: 2.5 to 4.0 N.m., M5: 4.0 to 6.0 N.m., M6:
6.0 to 7.5 Nm. Tighten the bolts according to the required torque.
Regularly check the tyres and the tread of the rear wheel: wear, cuts, cracks, pinching. Replace the tyre
if necessary. Check the wheel rims for excessive wear, warping, denting, cracks...
IV.

Revisions

For safety reasons and to maintain the components in a good state, you should have your bicycle
revised periodically by your distributor. Your bicycle should also undergo regular maintenance by a
qualified technician.
First revision: 1 month of 150 km

Check the components are well-tightened: crank arm, wheel, stem, pedals, handlebars, seat
clamp,

Check the power-assistance system is working correctly,

Check and adjust the brakes,

Tighten and/or straighten the wheels.

Tyre pressure
Every year or 2000 km:

Check the wear levels (brake pads, gear system, tyres),

Check the power-assistance system is working correctly,

Check the bearings (bottom bracket, wheels, steering, pedals),

• Check the cables (brakes, derailleur, suspension), or the hydraulic brake hose,

Tighten and/or straighten the wheels.

Tyre pressure
RECOMMMENDED TORQUE
(Nm)
30 - 40
30 - 40
9 - 10
14 – 15
6 – 8
6 – 8
18 – 20
30
52
SPECIFIC GUIDELINES
Lubricate the threads
Lubricate the threads
Quick clamp
Or quick clamp