Pedal Assistance And Battery; Pedalling Assistance; Presentation Of The Led Display; Activate / Deactivate The Led Display - Wayscral EVERYWAY E-100 Notice D'utilisation

E.

Pedal assistance and battery

The user must rotate the pedal forward to receive the motorized assistance. This is an important safety
feature. This power-assisted bicycle provides motorized assistance up to a speed of 25 km/h. Beyond
that, the engine will stop. You can go faster, but you will have to do it on your own, without any
electrical assistance.
The engine will not work until you have completed a full turn of the pedal. This feature protects the
motor and its controller and extends the life of the electrical components.
I.

Pedalling assistance

To start the bicycle, turn on the main switch on the side of the ON/OFF battery.
The rest of the settings and information are done directly on the display on the handlebars.
Recommendation: Please turn off the main switch on the battery when you are no
longer in the seat. This saves the battery charge.
1.

Presentation of the LED display

The LED display is as follows:
:
ON/OFF
Switch on/off
-: reduce
+: increase
2.

Activate / deactivate the LED display

To activate the assistance, press the "ON/OFF" button on the display once. The red charge indication
and assistance level LEDs will come on.
To turn off the assistance press and hold the "ON/OFF" button for 2 seconds. The red charge indication
and assist level LEDs will go off.
51
Battery level:
Empty
Full
Assistance
Low
Med
High