Changing The Brake Pads; Wear Of The Wheel Rims - Wayscral EVERYWAY E-100 Notice D'utilisation

•
Adjust the calliper symmetry, balancing the return springs of the right and left callipers.
•
A system consisting of a nut and a locking nut allows you to adjust the cable tension and
therefore the braking power, which will vary with time as the brake pads wear down.
2.

Changing the brake pads

- V-brake
Unscrew the pads using a 5 mm hex key.
Place the new pads on the calliper in the right direction.
Tighten the pads, while respecting the setting, see previous chapter IV.1.
3.

Wear of the wheel rims

As any other part that is subject to wear, the wheel rim should be checked regularly. The wheel rim
can weaken and break, causing you to lose control and fall.
More
tension
44