Adjusting The Gear Changing System - Wayscral EVERYWAY E-CARRIER Notice D'utilisation

Roller brake
Maintenance or repair of the coaster brake must be carried out by a
qualified technician.
Wear of the wheel rims
Like any part subject to wear, the wheel rim should be checked
regularly. The wheel rim can weaken and break, causing you to lose
control and fall.
WARNING: it is very important to check the wear of the
wheel rims. If the mark becomes invisible with a V-brake,
this means that the rim has reached its maximum wear for
safe use. A damaged wheel rim can be very dangerous
and must be replaced. Adjust the brake pads to maintain
a 1-1.5mm spacing with the rim.

3. Adjusting the gear changing system

Your bike has several manually interchangeable gears thanks to a
Shimano Nexus 7 speed system integrated into the rear hub. This
transmission system does not use a derailleur: the gear shift
takes place inside the hub. Use the right-hand lever to make the
desired change.
64
EN