Wayscral TAKEAWAY E-200 Notice D'utilisation page 85

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
Description of the issue
After switching the battery
on, the engine does not
provide pedal assistance.
Battery life is shorter (note:
battery
performance
directly influenced by user
weight, baggage, wind force,
type of road and constant
braking).
After connecting the charger,
the charging LEDs do not
light up.
Possible causes
1)
the
engine
(waterproof connection joint)
is loose,
2) the brake lever is not
correctly returned to the
normal position, which forces
the switch off,
3) the battery fuse is blown,
4) the speed sensor is too far
away.
5) the connection between
the sensor and the controller
is not established or has a
faulty contact.
1) insufficient charge time,
is
2) the ambient temperature is
too low and influences the
functioning of the battery,
3) can be caused by frequent
hills or headwinds, as well as
roads in poor condition,
4) the tyre pressure is not
high enough (inflate them),
5)
frequent
stops
restarts,
6) the battery has been
stored without being charged
for a long time.
1) problem with the electrical
outlet,
2) faulty contact between the
charger input socket and the
electrical outlet,
3) the temperature is too low.
85
Resolution
cable
First, check that the battery is
charged. If not, charge it,
then:
1) check that the connection
is well established, without
any give,
2) carefully return the brake
lever to its normal position
without braking,
3) open the top of the battery
pack and check the condition
of the fuse. If it is blown,
contact your retailer or an
authorised professional for a
replacement,
4)
adjust
between the sensor and the
magnetic tape so that it is not
more than 3 mm,
5)
make
sure
controller and the sensor are
connected properly.
1)
charge
following
the
(chapter D),
2)
in
winter
temperatures
your battery must be kept
indoors,
3) this is a normal cause and
the problem will be solved
and
with improved conditions,
4) inflate the tyres to a
pressure of 3.1 bar,
5) the problem will be solved
with the improvement of the
usage conditions,
6)
regularly
battery in accordance with
the instruction manual. If this
does not solve the problem,
contact your retailer or a
qualified professional.
1) check and repair the
electrical outlet,
2) check and fully insert the
plug,
3) charge indoors
If the above solutions do not
work, contact your retailer or
a qualified professional.
EN
the
distance
that
the
the
battery
instructions
or
at
below
0°C,
charge
the

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

2210554

Table des Matières