Changing The Pedals; Wheel And Engine; Luggage Rack - Wayscral EVERYWAY E-250 Notice D'utilisation

Replacing the chain
Since new chains are usually sold with too many links, the first step is to reduce it to the correct length.
The most secure way is to count the number of links in the old chain in order to adjust the new one.
To remove the old chain, simply undo a rivet.
Once it has been removed, the new one must be fitted. To fit the new chain, pass it around the chain
set and the rear sprocket so that it engages correctly on the other gear elements. To fasten the chain
closed, we recommend using a quick clamp. This acts as a female link which will be inserted between
two male links. Next, the quick clamp also allows you to remove the chain more easily for cleaning.
In order to check if the length of the chain is correct, it must be put on the small sprocket. In this
configuration, the virtual line drawn between the wheel hub of the rear wheel and the axis of the lower
derailleur pulley should be vertical.
VII.

Changing the pedals

To change your pedals, identify the pedals by looking at the letter noted on the pedal. The right pedal
is marked "R" (Right) and the left pedal is marked "L" (Left). Turn the pedal R clockwise to fix it onto
the crank arm. Turn the L pedal anti-clockwise.
VIII.

Wheel and engine

After the first month of use, it is advisable to tighten your spokes to limit the impact of engine traction
on your rear wheel. A slight noise may be heard when the engine is started. This noise is normal
because the engine starts and assists pedalling. This noise can become louder when in full use.
IX.

Luggage rack

Your bicycle is sold with a luggage rack:
Model
EVERYWAY E250
It is already fixed above your rear wheel. The fixing elements must be tightened and checked regularly
at a torque of 4 - 6 Nm. Your luggage rack is designed for a maximum load of 25 kg and a child seat can
be attached to it.
WARNING: your luggage rack is not designed to pull a trailer.
For safety reasons, luggage must only be carried on the luggage rack.
When the luggage rack is loaded, the bearing of your bicycle changes.
Spread the luggage load equally on both sides to help keep your bicycle stable. All luggage must be
securely stowed on the luggage rack, before each use it is important to check that nothing is hanging
in the void and risks being caught in the rear wheel of the bicycle. Do not make arbitrary adjustments
to the luggage rack; please ask your retailer for advice if you need to have it adjusted. Do not make
Bike size
28"
45
Luggage rack
HLYJ-X20