Charging Process - Wayscral EVERYWAY E-250 Notice D'utilisation

•
Do not touch the charger for too long during charging (risk of superficial burns).
•
Do not position the charger in an unstable way.
•
Do not cover the charger to avoid it overheating when charging.
•
Do not immerse the product
•
Avoid all contact with water when the battery is charging. Do not touch the charger with wet
hands.
•
Do not use the charger with a damaged power cord or plugs. Make sure that the charger port
is properly connected to the mains for charging.
•
Do not short-circuit the charger pins by using a metal object.
•
Disconnect the power supply before connecting or disconnecting the connections to the
battery.
•
This charger is designed to charge lithium batteries, do not charge the wrong type of battery.
Do not use on a non-rechargeable battery.
•
This bicycle can be used by children aged from 14 years and above and persons with reduced
physical, sensory or mental capabilities or lack of experience and knowledge if they have been
given supervision or instruction concerning use of the device in a safe way and understand the
hazards involved. Children should not play with the bicycle. Cleaning and user maintenance
must not be carried out by children without supervision.
•
Children should be supervised to ensure that they do not play with the bicycle.
•
Keep out of reach of children; this product is not a toy.
•
The product's external flexible cable cannot be replaced; if the cord is damaged, the product
should be discarded.
•
At the end of its life, take the product to a recycling centre.
V.

Charging process

If a power outlet is available near your bicycle, you can charge the battery directly on the bicycle
without detaching it. The charger port is covered by a plastic cap, simply open it to charge the battery
directly.
Removing the battery can be useful in places that cannot accommodate your bike or when it is not
near a power outlet.
RECOMMENDATION: the battery should be charged indoors in a ventilated area.
Please charge the bicycle battery according to the following procedure:
•
The battery must be recharged using the supplied charger connected to a standard power
outlet.
•
Insert the charger plug into the battery and plug the charger power cable into a nearby socket.
•
When charging, the LED on the charger will be red to show that it is working correctly. When
it turns green, it means that the battery is charged.
55