Mounting The Bike Handle - Stihl FS 240 Notice D'emploi

Masquer les pouces Voir aussi pour FS 240:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

English

Mounting the Bike Handle

Mounting Bike Handle with Swiveling
Handle Support
The machine is supplied with the
swiveling handle support already
mounted on the shaft. To mount the
handlebar it is necessary to remove the
clamp moldings.
14
Removing the clamp moldings
Hold the lower clamp (1) and upper
N
clamp (2) firmly together.
Release the wing screw (3) – the
N
clamps are loose once the wing
screw has been released. They are
pushed apart by the two
springs (4 and 5).
Pull out the wing screw – the
N
washer (6) remains on the wing
screw.
2
1
Hold the lower clamp (1) steady and
N
remove the upper clamp (2) –
separate the parts so that the
springs (4, 5) remain in position in
the lower clamp.
5
1
If the spring (5) has slipped out of the
lower clamp (1):
Fit the spring in the clamp's annular
N
groove as shown.
FS 240, FS 240 R
4
5

Publicité

Chapitres

Table des Matières
loading

Ce manuel est également adapté pour:

Fs 240 r

Table des Matières