Engine Running Behavior; Lubricating The Gearbox - Stihl FS 240 Notice D'emploi

English
Use resistor type spark plugs with a
N
properly tightened adapter nut.
Installing the spark plug
Screw in spark plug
N
Firmly press the spark plug
N
connector onto the spark plug.
Align the spark plug connector so
N
that the ignition cable points to the
upper left corner (arrow).
4
3
2
Place the cap (1) on the hood from
N
behind and at a slight angle,
pressing the nose (2) into the
opening (3) of the hood.
On the front, swivel the cap onto the
N
hood, screw in the screw (4) and
tighten.
36

Engine Running Behavior

If engine running behavior is still
unsatisfactory after the air filter has been
serviced and the carburetor and throttle
cable have been adjusted correctly, the
cause may also be in the muffler.
Have the muffler checked for
contamination (coking) by a servicing
dealer!
STIHL recommends that maintenance
and repair work be carried out only by
authorized STIHL dealers.

Lubricating the Gearbox

Gearbox without Screw Plug
If the gearbox has no screw plug:
N
gearbox is maintenance-free and
requires no re-lubrication.
Gearbox with Screw Plug
1
If the gearbox has a screw plug (1):
N
Check grease level after every 25
hours of operation and re-lubricate if
necessary.
FS 240, FS 240 R