Approved Power Tool Attachments - Stihl FS 240 Notice D'emploi

Approved Combinations
Select correct combination from the
table according to the cutting
attachment you intend to use.
WARNING
For safety reasons only the cutting
attachments, deflectors, handles and
harnesses shown in each row of the
table may be used together. No other
combinations are permitted because of
the risk of accidents.
Cutting Attachments
Mowing heads
1 STIHL SuperCut 20-2
2 STIHL AutoCut 25-2
3 STIHL AutoCut C 26-2
4 STIHL AutoCut 30-2
5 STIHL AutoCut 36-2
6 STIHL TrimCut 31-2
7 STIHL DuroCut 20-2
8 STIHL PolyCut 20-3
Metal cutting attachments
9 Grass cutting blade 230-2
(230 mm dia.)
10 Grass cutting blade 260-2
(260 mm dia.)
11 Grass cutting blade 230-4
(230 mm dia.)
12 Grass cutting blade 230-8
(230 mm dia.)
13 Grass cutting blade 250-40 Spezial
(250 mm dia.)
FS 240, FS 240 R
14 Grass cutting blade 250-44
(250 mm dia.)
15 Brush knife 250-3
(250 mm dia.)
16 Scratcher tooth circular saw blade
200
(200 mm dia.)
17 Chisel tooth circular saw blade 200-
22 (4112), chisel tooth circular saw
blade 200-22 HP (4001)
WARNING
Non-metal grass cutting blades, brush
knives and circular saw blades are not
approved.
Deflectors, Limit Stop
18 Deflector for mowing heads
19 Deflector with
20 skirt and blade, for mowing heads
21 Deflector without skirt and blade, for
metal cutting attachments 9 to 15
22 Limit stop for circular saw blades
Handles
23 Loop handle
24 Loop handle with
25 barrier bar
26 Bike handle
Harnesses
27 Shoulder strap must be used
28 Full harness may be used
29 Full harness must be used
Approved Power Tool
Attachments
The following STIHL attachment may be
mounted to the basic power tool:
BF
Interchangeable
Attachment Application
BF Pick tines
English
13