Engine Running Behavior; Lubricating The Gearbox - Stihl HS 45 Notice D'emploi

Use resistor type spark plugs with a
N
properly tightened adapter nut.
Installing the spark plug
Fit the spark plug by hand and
N
screw it in
Tighten spark plug with combination
N
wrench
Press the spark plug boot firmly
N
onto the spark plug
HS 45

Engine Running Behavior

If engine running behavior is
unsatisfactory even though the air filter
is clean and the carburetor is properly
adjusted, the cause may be the muffler.
Have the muffler checked for
contamination (carbonization) by your
servicing dealer.
STIHL recommends that you have
servicing and repair work carried out
exclusively by an authorized STIHL
servicing dealer.

Lubricating the Gearbox

Use STIHL gear lubricant for hedge
trimmers (special accessory) to lubricate
the blade drive gear.
1
2
After about 50 hours of operation:
Remove the screw plug (1) from the
N
gearbox.
Screw the tube of grease (2) into the
N
filler hole.
Squeeze up to 5 g grease into the
N
gearbox.
NOTICE
Do not completely fill the gearbox with
grease.
Remove the tube of grease (2).
N
Refit the filler plug and tighten it
N
down firmly.
English
15