Mounting The Bike Handle - Stihl FS 510 C Notice D'emploi

English
Approved Combinations
Select correct combination from the
table according to the cutting
attachment you intend to use.
WARNING
For safety reasons only the cutting
attachments and deflectors or limit stops
shown in each row of the table may be
used together. No other combinations
are permitted because of the risk of
accidents.
Cutting Attachments
Mowing heads
1 STIHL AutoCut 40-4
2 STIHL AutoCut 56-2
3 STIHL TrimCut 51-2
4 STIHL DuroCut 40-4
5 STIHL PolyCut 41-3
Metal cutting attachments
6 Grass cutting blade 255-8
(255 mm dia.)
7 Grass cutting blade 250-40 Spezial
(250 mm dia.)
8 Brush knife 305-2 Spezial
(305 mm dia.)
9 Brush knife 350-3
(350 mm dia.)
10 Shredder blade 320-2
(320 mm dia.)
14
11 Scratcher tooth circular saw blade
225
(225 mm dia.)
12 Chisel tooth circular saw blade 225
(225 mm dia.)
13 Carbide tipped circular saw blade
225
(225 mm dia.)
WARNING
Non-metal grass cutting blades, brush
knives, shredder blades and circular
saw blades are not approved.
Deflectors, Limit Stop
14 Deflector for mowing heads
15 Deflector for metal cutting
attachments, items 6 to 9
16 Deflector for shredder blade
17 Limit stop for circular saw blades
Harness
18 Full harness must be used

Mounting the Bike Handle

Mounting Bike Handle with Swiveling
Handle Support
1
Do not rotate the control handle (1)
between unpacking and mounting it on
the handlebar; see also chapter on
"Adjusting the Throttle Cable".
The brushcutter is available with two
different handlebars:
2
4
2 Handlebar for machines used
primarily for mowing, brushcutting
and shredding, but also for
occasional sawing.
FS 510 C, FS 560 C