Velleman DVR16M Mode D'emploi page 13

e) Recording Mode Set-Up
1) Enter "RECORD" menu
Press the MENU button on the front of the device, enter the password
and confirm it by pressing ENTER (cf. "4a: Open Main Menu" on p. 7)
Press or until 'RECORD' is selected (cf. figure on the right).
Press ENTER to enter the recording menu. A screen as shown on the
right will be displayed.
2) HDD OVERWRITE Set-Up
1. Press or to select 'HDD OVERWRITE' and press ENTER to open the HDD overwrite set-up.
2. Press or to set HDD OVERWRITE: YES (HDD overwritten when full) / NO (recording stops when HDD is full)
3. Press MENU to confirm the current set-up and return to the previous menu.
4. Press MENU again to exit and close the record menu.
3) Recording IPS Set-Up (images per second)
1. Press or to select 'RECORD IPS' and press ENTER to open the IPS set-up.
2. Press or to set the IPS recording speed: 15A-15-8-4-2-1 (NTSC) or 12A-12-6-3-2-1 (PAL).
3. Press MENU to confirm the current set-up and return to the previous menu.
4. Press MENU again to exit and close the record menu.
4) Recording Quality Set-Up
1. Press or to select 'RECORD QUALITY' and press ENTER to open the recording quality set-up.
2. Press or to set RECORD QUALITY: BEST, HIGH, NORMAL or BASIC.
3. Press MENU to confirm the current set-up and return to the previous menu.
4. Press MENU again to exit and close the record menu.
5) Alarm Recording IPS Set-Up (images per second)
1. Press or to select 'ALARM REC IPS' and press ENTER to open the IPS set-up.
2. Press or to set the IPS recording speed: 25A-15-8-4-2-1 (NTSC) or 18A-12-6-3-2-1 (PAL).
3. Press MENU to confirm the current set-up and return to the previous menu.
4. Press MENU again to exit and close the record menu.
6) Alarm Recording Quality Set-Up
1. Press or to select 'ALARM REC QUALITY' and press ENTER to open the recording quality set-up.
2. Press or to set ALARM REC QUALITY: BEST, HIGH, NORMAL or BASIC.
3. Press MENU to confirm the current set-up and return to the previous menu.
4. Press MENU again to exit and close the record menu.
7) Motion Trigger Recording Set-Up
1. Press or to select 'MOTION TRIGGER RECORD' and press ENTER to open the motion recording set-up.
2. Press or to set MOTION TRIGGER RECORD to ON (motion detection will trigger recording) or OFF.
3. Press MENU to confirm the current set-up and return to the previous menu.
4. Press MENU again to exit and close the record menu.
DVR16M
► HDD OVERWRITE: NO
- 13 -
(MENU)
SEARCH
TIMER
► RECORD
CAMERA
SYSTEM
EVENT
(RECORD)
RECORD IPS: 15A
RECORD QUALITY: NORMAL
ALARM REC IPS: 15A
ALARM REC QUALITY: NORMAL
MOTION TRIGGER RECORD: ON
VELLEMAN