Velleman DVR16M Mode D'emploi page 12

d) Timer Programming
1) Enter "Timer" Menu
Press the MENU button on the front of the device, enter the password
and confirm it by pressing ENTER (cf. "4a: Open Main Menu" on p. 7)
Press or until 'TIMER' is selected (cf. figure on the right).
Press ENTER to enter the timer menu. The screen as shown on the
right will be displayed.
2) Timer Recording Set-Up
1. Press ENTER to set the day selection of the first line.
2. Press or to select the day set-up:
DAILY : every day
MON : Monday
TUE : Tuesday
WED : Wednesday
THU : Thursday
FRI : Friday
SAT : Saturday
SUN : Sunday
MO-FR : Monday to Friday
SA-SU : Saturday & Sunday
JAN-01 : special date.
OFF : Not activated
3. Press or to select the recording start time (HH:MM).
Press or to set the recording start time.
4. Press or to select the recording end time (HH:MM).
Press or to set the recording end time.
5. Press or to select the recording quality.
Press or to set the recording quality to BEST, HIGH, NORMAL or BASIC.
6. Press or to select the number of images per second (IPS).
Press or to set the number of IPS:
NTSC : 1, 2, 4, 8, 15, 25A
PAL: 1, 2, 3, 6, 12, 18A
REMARK: Recording quality and format are determined in the 'Record' menu (see below).
7. Press MENU to confirm current settings and ENTER to go to the next programming line.
8. Press or to select 'Timer Enable'
Yes: to activate the programmed settings.
No: to ignore the programmed settings.
9. Press MENU to confirm the current set-up and return to the previous menu.
10. Press MENU again to exit and close the Timer menu.
DVR16M
- 12 -
(Menu)
SEARCH
► TIMER
RECORD
CAMERA
SYSTEM
EVENT
(TIMER)
DAY START END QUALITY IPS
DAILY 00:00 00:00 BEST 25A
DAILY 00:00 00:00 BEST 25A
DAILY 00:00 00:00 BEST 25A
DAILY 00:00 00:00 BEST 25A
DAILY 00:00 00:00 BEST 25A
DAILY 00:00 00:00 BEST 25A
DAILY 00:00 00:00 BEST 25A
TIMER ENABLE: NO
VELLEMAN