Operation; Connection To The Vehicle - Bosch KTS 340 Mode D'emploi

�.2.� Licensing the �TS ��� by fax
1. Select the "Licensing >> Fax" menu in the Start-
center.
? The "License request" input box is opened.
2. Step 1: Enter company data.
3. Step 2: Select country for license request.
4. Step 3: Enter ID number and print out licensing
form.
5. Sign licensing form and submit by fax.
�.2.� �TS ��� fax licensing procedure
Once you have received the license key by fax, you need
to perform the actual licensing.
1. Connect the KTS 340 to the mains voltage via the
supplied power supply unit, and switch on.
? The KTS 340 starts up.
2. Connect the KTS 340 to a PC/laptop by means of the
USB connecting cable.
3. Click the "Licensing >> Licensing procedure" menu
in the Startcenter.
? The "License request" input box opens.
4. Enter the customer number, ID number and license
key.
5. Perform licensing.
? The license key is transferred.
? If licensing is successful, the KTS 340 is restarted.
"
The KTS 340 is now licensed and can be used for control
unit diagnosis.
Robert Bosch LLC
Commissioning | �TS ��� | 1�
5.

Operation

5.1

Connection to the vehicle

The KTS 340 is designed for operation on vehicles with
a battery voltage of 12 V and 24 V.
!
Make sure the OBD diagnostic cable is properly con-
nected to the KTS 340 and firmly attached. Incorrect
connection could cause the pins of the connector
to bend or break off. Only use the OBD diagnostic
cable contained in the scope of delivery.
1
9
2
10
3
11
4
12
13 5
14
6
15
7
16
8
8
7
Fig. 3: KTS 340 connection diagram
1 OBD diagnostic socket in vehicle
2 OBD diagnostic cable
3 UNI connecting cable
4 USB connecting cable
5 Connecting cable for cigarette lighter socket (special accessory)
6 Power supply unit
7 KTS 340
8 Measuring leads
Placing the �TS ��� on the steering wheel
will lead to a risk of injury due to triggering
of the airbag.
�TS ��� | 1� | 1� en
1
2
3
4
5
6
|
1 689 989 072 2010-04-06