Description Of The Unit; Led Status; Battery Charge Led; Wlan Led - Bosch KTS 340 Mode D'emploi

en 8 | �TS ��� | Product description
�.5

Description of the unit

The KTS 340 is a modular, portable diagnostic system
that can be used anywhere. The KTS 340 features a
computer unit with memory card and an 8.4 inch LCD
touchscreen. ESI[tronic] is pre-installed on the memory
card at the factory.
The operator has a choice of a stylus for the LCD
touchscreen and an on-screen keyboard.
The KTS 340 and accessories are supplied in a protec-
tive case.
8
7
6
5
4
3
Fig. 1: KTS 340
1 Stylus holder
2 Stylus
3 On/Off button
4 Power supply unit connection
5 USB port
6 WLAN LED
7 Battery charge LED
8 LCD touchscreen
!
There is a risk of injury from glass splinters should
the LCD glass cover break.
CH2 CH1
DIAG
m ax. 60 V
3 4 5
1 2 6
Fig. 2: Rear view of KTS 340
1 Stylus compartment
2 CH2 measurement input
3 Ground connection
4 CH1(-) measurement input
5 CH1(+) measurement input
6 Diagnostic cable connection (DIAG)
7 Connection for Kensington security lock
|
1 689 989 072 2010-04-06
�.6
�.6.1

Battery charge LED

Green light
Flashing green
Yellow light
Flashing yellow
1
Red light
Flashing red
2
�.6.2

WLAN LED

Green light
Yellow light
Red light
Off
459843_1Ko
7

LED status

Battery charge LED
Status
Battery fully charged, external
power supply connected.
Battery fully charged, external
power supply not connected.
Battery being charged, external
power supply connected.
Battery almost flat, connect
external power supply.
Fault on charging.
Battery flat (KTS 340 will be
switched off within 2 minutes),
connect external power supply.
WLAN LED
Status
WLAN is configured and KTS 340
is connected to an access point,
field strength good.
WLAN is configured and KTS 340
is connected to an access point,
field strength poor.
WLAN is configured, KTS 340 is
not connected to an access point.
WLAN is not configured.
Robert Bosch LLC