Medion LIFE S44080 Mode D'emploi page 424

Setting
METERING
EXPOSURE
BRACKET-
ING
The measurement method for the calcula-
tion of the exposure is defined here:
MULTI - Selects an exposure based on the
measurement results at several points in the
shooting range.
CENTER - The light in the entire shooting
range is measured but the measurement is
weighted towards the values near the centre.
SPOT - An exposure is selected on the ba-
sis of one single measurement in the centre
of the picture.
Use this feature to take photos with different
exposure compensation levels. When using
bracketing, a series of 3 photos are taken in
the following order: standard exposure, un-
der-exposed and over-exposed.
The available setting are: Off, ±0.3, ±0.7 and
±1.0.
Meaning
DE
FR
NL
EN
425 of 480