NOTE!
To take close-ups, select macro mode using the
ton.
8.3.1. Using the stabiliser
The stabiliser makes it possible to take better shots in poor light-
ing conditions. The risk of blurred photographs is thus reduced.
From the camera menu, select "STABILIZER" and activate
or deactivate the function here.
8.3.2. Using the flash
If there is insufficient light for the photo, the built-in flash can
provide the additional light required.
Press the flash button repeatedly to select the following flash
settings:
AUTO: The flash is activated automatically when the
shooting conditions require additional lighting.
Flash is triggered before the actual flash; used to
prevent "red-eye" effect. The camera detects the
brightness of subjects and only flashes if necessary.
412 of 480
but-