Open - Optelec ClearReader+ Manuel D'utilisation

+
Optelec ClearReader
If you wish to save a document without a voice label, select "No". The document will be saved
using the first line of the document as the name of the document. If you would like to add a voice
label, select "Yes". You will hear a beep after which you have 5 seconds to record a voice label. At
the end of the recording you will hear another beep. The document will be saved with the recorded
voice label.
+
When the document is saved, the ClearReader will ask if you would like to append more pages to
the document.
If you select "No", the menu will be closed, showing the document again. If you select "Yes", you
can start appending more pages to the document by pressing the Scan button. To stop appending
pages to the document, press the Menu button marked with the "M" or the Play / Pause key on the
+
ClearReader .
+
The ClearReader will prompt you with the question if the captured pages should be processed. If
"No" is selected, the conversion to text will be done while reading the document. If "Yes" is
selected, all pages will be processed before returning to the document reading mode. This
process may take several minutes, depending on the number of pages of the document.

5.2.2. Open

To open a document, open the menu and navigate to the green Open button with the Back and
+
Forward button on the ClearReader or the arrow keys on the feature pack. Activate the Open
button with the Play / Pause button. Select the "Document" button to see the list of saved
English 42