I-Tech T-ONE REHAB Notice D'utilisation page 98

increments. To decrease the intensity, use the coloured
CH1/CH2/CH3/CH4 down arrow keys.
T-ONE REHAB can detect the connection of the electrodes: if incorrectly
connected, it resets the intensity value once it reaches 10mA. On the display
will appear setting similar to the ones below:
The settings displayed vary based on the program selected by you; you can
also change the stimulation intensity for the selected program.
For programs consisting of a single phase, the device's screen will be similar
to the one below, showing the overall treatment time and the intensity set on
each channel:
For programs consisting of multiple phases (from 2 to 4, typically NEMS and
BEAUTY programs but also some of the TENS programs) the device's screen
will be similar to the one below, showing the work phase (PHASE) in the lower
left corner:
Some programs allow you to select the muscular area to be treated (upper
limbs, trunk, lower limbs) and they also come with special MALE/ FEMALE
modes. After choosing the program, the display will show a screen similar to
the following:
IACER Srl 94 MNPG236-02