U.S.Robotics 56K USB Faxmodem Guide D'installation page 8

Note: You can reinstall the ControlCenter software from the Installation CD, if necessary.
In order to verify the installation, click Windows Start, Settings, and Control Panel. If this
application was not automatically installed, click Windows Start and then click Run. In the
"Run" Dialog box, type D:\setup.exe and click OK. (If your CD-ROM uses a different letter,
type that letter in place of "D".) Choose the Software option and then follow the instruc-
tions to install the ControlCenter software.
Install the Internet Call Notification software.
Remove and reinsert the Installation CD into the CD-ROM drive. An interface will appear that will
enable you to:
• Install software (such as Internet Call Notification or Phonetools fax software)
• View User Guides for the software and your modem
• Change languages
• Obtain support and troubleshooting information
If the interface does not appear automatically, click Windows Start and then click Run. In the
"Run" dialog box, type D:\setup.exe and click OK. If your CD-ROM drive uses a different letter,
type that letter in place of "D".
Select the Software option, select the Internet Call Notification option, and click Install. When the
"Choose Setup Language" dialog box appears, select from the drop-down menu the language of
your choice and click OK.
Internet Call Notification enables the V.92 feature "Modem On Hold" which allows your Internet
connection to be suspended when there is an inbound telephone call.
• If you are connecting to a service provider that supports V.92, you will receive a message
informing you of an incoming call. In addition, if you subscribe to Caller ID service, the num-
ber of the incoming call will be displayed in the computer's message window. You will then
have the option to accept the call or to ignore it. If you choose to accept the call, another
message will appear notifying you of the length of time that the provider's system will wait
on hold before the data connection is terminated. You can then return to the connection
when the call is completed without losing the connection.
• If you are connecting to a server that does not support V.92, you will receive a message
informing you of an incoming call. You will then have the option to accept the call or to
ignore it. If you choose to accept the call, your data connection will be terminated.
Phonetools software allows you to send and receive faxes and is included as an optional piece of
software for your convenience.
Uninstallation Instructions
Step 1: Uninstall the modem drivers using the Add/Remove Programs.
Windows 98SE
Click Windows Start, Settings, and Control Panel. Double-click Add/Remove Programs. Click the
Install/Uninstall tab. Select U.S. Robotics 56K USB Faxmodem and click Remove.
Windows Me
Click Windows Start, Settings, and Control Panel. Double-click Modems. Select U.S. Robotics
56K USB Faxmodem and click Remove.
4