U.S.Robotics 56K USB Faxmodem Guide D'installation page 7

detect and report a search for drivers for the Modem Device; click Next. Choose Search for the
best driver for your device (Recommended) and click Next. Click Specify a location and type D:\.
Click Next. (If your CD-ROM uses a different letter, type that letter in place of "D".) When Win-
dows locates the correct drivers for the U.S. Robotics 56K USB Faxmodem, click Next. When Win-
dows is finished installing the software, click Finish.
Windows Me
Windows Me will first need to install the Modem Enumerator. Select Specify the location of the
driver (Advanced) and click Next. Click Specify a location and type D:\WinME. Click Next. (If your
CD-ROM uses a different letter, type that letter in place of "D".) When Windows locates the cor-
rect drivers for the Modem Enumerator, click Next. After this is completed, Windows Me will now
prompt you for the drivers for the Modem Device. Select Specify the location of the driver
(Advanced) and click Next. Click Specify a location and type D:\WinME. Click Next. (If your CD-
ROM uses a different letter, type that letter in place of "D".) When Windows locates the correct
drivers for the U.S. Robotics 56K USB Faxmodem, click Next. Click Yes to continue if a "Digital Sig-
nature Not Found" screen appears. When Windows is finished installing the software, click
Finish.
Windows 2000
Select Search for a suitable driver for my device (recommended) and click Next. Click Specify a
location and type D:\2000_xp. Click Next. (If your CD-ROM uses a different letter, type that letter
in place of "D".) When Windows locates the correct drivers for the U.S. Robotics 56K USB Faxmo-
dem, click Next. Click Yes to continue if a "Digital Signature Not Found" screen appears. When
Windows is finished installing the software, click Finish.
Note: The power light (PWR LED) does not illuminate until the first set of drivers is
installed. If PWR does not illuminate after the drivers are installed, then the modem may
not be connected. Make sure the USB cable is connected between the modem and the
computer.
Windows XP
Select Install from a list or specific location (advanced) and click Next. Click Include this loca-
tion in the search and type D:\2000_xp. Click Next. (If your CD-ROM uses a different letter, type
that letter in place of "D".) When Windows locates the correct drivers for the U.S. Robotics 56K
USB Faxmodem, click Next. Click Continue Anyway when the Windows logo testing screen
appears. When Windows is finished installing the software, click Finish.
Install the ControlCenter software.
Select the Software option from the GUI Interface on the Installation CD, select the ControlCenter
option, and click Install. When the "Choose Setup Language" dialog box appears, select from the
drop-down menu the language of your choice and click OK.
The ControlCenter software allows you to configure your V.92 modem settings and automatically
notifies you of any updates to your modem's code. When you run ControlCenter for the first time,
the software will detect your U.S. Robotics modem. Click the icon for your modem. If you need
instructions, click the link for the ControlCenter manual within the ControlCenter interface.
3