U.S.Robotics 56K USB Faxmodem Guide D'installation page 14

line may result in the devices not ringing in response to an incoming call. In most but not all areas, the sum of RENs should not
exceed five (5.0). To be certain of the number of devices that may be connected to a line, as determined by the total RENs, contact
the local telephone company. For products approved after July 23, 2001, the REN for this product is part of the product identifier
that has the format US: AAAEQ##TXXXX. The digits represented by ## are the REN without a decimal point (e.g., 03 is a REN of 0.3).
If this equipment, U.S. Robotics 56K USB Faxmodem, causes harm to the telephone network, the telephone company will notify you
in advance that temporary discontinuance of service may be required. But if advance notice is not practical, the telephone company
will notify the customer as soon as possible. Also, you will be advised of your right to file a complaint with the FCC if you believe it
is necessary.
The telephone company may make changes in its facilities, equipment, operations or procedures that could affect the operation of
the equipment. If this happens the telephone company will provide advance notice in order for you to make necessary
modifications to maintain uninterrupted service.
If trouble is experienced with this equipment, for repair or warranty information, please contact:
USR - Walnut
528 Spanish Lane
Walnut, CA 91789
If the equipment is causing harm to the telephone network, the telephone company may request that you disconnect the
equipment until the problem is resolved.
There are no serviceable parts in this equipment.
If your home has specially wired alarm equipment connected to the telephone line, ensure the installation of this equipment does
not disable your alarm equipment. If you have questions about what will disable alarm equipment, consult your telephone com-
pany or a qualified installer.
UL Listing/CUL Listing
This information technology equipment is UL-Listed and CUL Listed for the uses described in the User Guide.
If you use your own telephone cable, you must use a minimum No. 26 AWG and FCC compliant telephone cable.
Fax Branding:
The Telephone Consumer Protection Act of 1991 makes it unlawful for any person to use a computer or other electronic device,
including fax machines, to send any message unless such message clearly contains in the margin at the top or bottom of each
transmitted page or on the first page of the transmission, the date and time it is sent, an identification of the business or other
entity, or other individual sending the message, and the telephone number of the sending machine or of such business, other
entity, or individual. (The telephone number provided may not be a 900 number or any other number for which charges exceed
local or long-distance transmission charges.) In order to program this information into your modem, refer to the BVRP software on
the CD-ROM that shipped with your modem. If you are using a different communication software program, refer to its manual.
Radio and Television Interference:
This equipment generates, uses, and can radiate radio frequency energy. If this equipment is not installed and used in accordance
with the manufacturer's instructions, it may cause interference to radio and television communications. The modem has been
tested and found to comply with the limits for a Class B computing device in accordance with the specifications in Part 15 of FCC
rules, which are designed to provide reasonable protection against such interference in a residential installation.
For Canadian Modem Users
Utilisateurs de modems au Canada
Industry Canada (IC)
This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the interference-
causing equipment standard entitled Digital Apparatus, ICES-003 of Industry Canada.
Le présent appareil numérique n'émet pas de bruits radio-électriques dépassant les limites applicables aux appareils numériques
de la classe B prescrites dans le Règlement sur le brouillage radioélectrique édictée par l'Industrie. NMB-003
Customer Information
Notice: This equipment meets the applicable Industry Canada Terminal Equipment Technical Specifications. This is confirmed by
the registration number. The abbreviation, IC, before the registration number signifies that registration was performed based on a
Declaration of Conformity indicating that Industry Canada technical specifications were met. It does not imply that Industry Can-
ada approved the equipment.
Notice: The Ringer Equivalence Number (REN) for this terminal equipment is 0.1B. The REN assigned to each terminal equipment
provides an indication of the maximum number of terminals allowed to be connected to a telephone interface. The termination on
a interface may consist of any combination of devices subject only to the requirement that the sum of the Ringer Equivalence
10