Using/Adjusting The Patient Operated Wheel Locks - Invacare PATRIOT Manuel De L'utilisateur Et D'entretien

ANTI-TIPPERS/WHEEL LOCKS
NOTE: Refer to the following charts to ensure the correct anti-tipper is installed in the wheelchair. Seat-to-Floor heights are
approximate depending on front caster size and type. Anti-Tipper length measurement is taken with the extension tube in
the longest position available.The anti-tipper height measurement MUST be taken with the anti-tipper on a flat surface.
CASTER SIZE SEAT-TO-FLOOR
8-INCH 17-1/2,18-1/2,19-1/2-inches
6-INCH 15-1/2,16-1/2,17-1/2-inches
CASTER SIZE SEAT-TO-FLOOR
8-INCH 17-1/2,18-1/2,19-1/2-inches
6-INCH 16-1/2,17-1/2-inches
6-INCH (SHE)*
CASTER SIZE SEAT-TO-FLOOR
8-INCH 17-1/2,18-1/2,19-1/2-inches
6-INCH 16-1/2,17-1/2-inches
6-INCH (SHE)*
* SHE stands for Super Hemi wheelchairs that have a 15-1/2 seat-to-floor height.
USING/ADJUSTING THE PATIENT
OPERATED WHEEL LOCKS
Using the Patient Operated Wheel Locks
(FIGURE 3)
WARNING
DO NOT attempt to stop a moving wheel-
chair with the wheel locks. WHEEL LOCKS
ARE NOT BRAKES.
1. Ensure wheelchair is not moving before engaging.
2. Perform one (1) of the following:
A. Push-to-Lock - To engage, push the wheel lock
handle FORWARD.
B. Pull-to-Lock - To engage, pull the wheel lock
handle BACKWARD.
3. Disengage the wheel locks by reversing STEP 2.
Anti-Tipper Height
Anti-Tipper Length
PATRIOT SL WHEELCHAIR
HEIGHT
0
PATRIOT WITH 0 OR 3
HEIGHT
15-1/2-inches
PATRIOT WITH 6
HEIGHT
15-1/2-inches
ANTI-TIPPER
LENGTH/HEIGHT
13-1/2, 3-1/2-inches
11-5/8, 2-3/4-inches
0
SEAT-TO-FLOOR ANGLE
ANTI-TIPPER
LENGTH/HEIGHT
14, 4-1/2-inches
13-3/4, 3-1/2-inches
12-3/4, 2-7/8-inches
0
SEAT-TO-FLOOR ANGLE
ANTI-TIPPER
LENGTH/HEIGHT
14-1/4, 3-1/4-inches
12-3/4, 2-1/4-inches
10, 1-3/4-inches
Unlocked Position
Unlocked Position
FIGURE 3 - USING THE PATIENT OPERATED
29
PROCEDURE 7
Flat Surface
ON CHAIR OFF CHAIR
(PAIR)
1360 1061111
1360A 1061112
ON CHAIR OFF CHAIR
KIT NUMBER
P1580 1090113
P1580A 1050644
P1580SHE 1050641
ON CHAIR OFF CHAIR
KIT NUMBER
N/A 1090114
N/A 1090115
N/A 1090116
PUSH-TO-LOCK
Locked Position
Wheel Lock
PULL-TO-LOCK
Locked Position
Wheel Lock
WHEEL LOCKS
A
N
T
I
T
I
P
P
E
R
S
W
H
E
E
L
L
O
C
K
S