Visio 3 - Built-In Dimensions - attika RAIS VISIO 1 Mode D'emploi

English

VISIO 3 - Built-in dimensions

Wall opening VISIO 3 - panels
Wall opening (height x width x depth) min. 432 x 770 x 443 mm (inner dimensions).
Panel type
ol 50mm
12.5 mm Fermacell with 25 mm mineral wool
50 mm calcium silicate boards
In case the stove is placed against a combustible wall, the back wall must be made of
12.5mm Fermacell + 25mm mineral wool or 50 mm calcium silicate boards. The min-
eral wool is facing the stove.
The inner dimensions (wall opening) applies for installing the stove without outer front
cover (accessory). If a front cover is used, the wall opening is to be increased/corrected
equalling the thickness of the front cover.
A fireplace insert must never be built in tightly as steel expands during heating.
Construction of back wall
25 mm mineral wool
12.5 mm Fermacell
46 46
Hulmål til VISIO 3 - Fermacell 13
Indvendige mål er angivet ved indbygning af
ovn (uden afdækning).
Hvis en afdækning indbygges, skal hulmålet øges
svarende til tykkelsen af afdækningen.
Inner distance to
back wall
attika
RAIS/ - User manual for VISIO
Inner distance to back wall
620 mm
607.5 mm
12.5 mm Fermacell or
50 mm calcium
silicate boards