attika RAIS VISIO 1 Mode D'emploi page 175

English
VISIO 2 - installation distances- brick wall
Reflector plate
Distance from reflec-
tor to
non-combustible 0
mm (10 mm is recom-
mended).
RAIS/
A-A
Clearance height above
burning chamber
min. 698 mm
Distance from front glass to
attika
- User manual for VISIO
A-A
Any convection areas
must be placed just
below the sloped plate.
To guide the hot air out of
the convection outlets, RAIS
recommends to mount a
sloped, non-combustible and
insulating plate (Fermacell +
mineral wool or similar) above
the outlets.
Fermacell is facing down.
Installation height
min. 385 mm
furniture min. 1200 mm
Construction of sloped plate.
25 mm mineral wool
12.5 mm Fermacell
45 45