attika RAIS VISIO 1 Mode D'emploi page 172

English
VISIO 2 - installation distances - panels
ATTENTION!
Insulated chimney (acc.) all
the way down to the collar
Reflector plate
Distance from reflector to
back wall (see table)
Panel type
12.5 mm Fermacell with
25 mm brandbats
50 mm calcium silicate boards
42 42
A-A
Distance from front glass to
furniture min. 1200 mm
attika
RAIS/ - User manual for VISIO
Clearance height above
burning chamber
min. 698 mm
Convection area is placed
just below the sloped plate.
To guide the hot air out of
the convection outlets, RAIS
recommends to mount a
sloped, non-combustible and
insulating plate (Fermacell +
mineral wool or similar) above
the outlets.
Fermacell is facing down.
Installation height
min. 385 mm
Distance to back wall
75 mm
62.5 mm