Convection; Material Selection - attika RAIS VISIO 1 Mode D'emploi

English

Convection

attika
RAIS/ stoves are convection stoves. Convection means that there is a circula-
tion of air, which ensures that the heat is distributed more evenly throughout the entire
cold air
room. The
channel, which runs along the stove's combustion chamber.
heated air
The pours out at the top of the stove, which ensures a circulation of warm
air throughout the room.
Note, however, that all exterior surfaces become hot during use - so take extreme care.
Use the insert optimally.
By installing hot air nozzles and flexible hoses (or similar) on top of the stove, it is pos-
sible to "move" the heat to other rooms.
Consider the placement of convection and outlet holes. Ensure that the area require-
ments are respected and that the holes are not blocked from the outside. There may
be discoloration of the wall above the stove doors, and above the convection outlet
holes. This is due to the ascending hot air.
attika
RAIS/ accepts no liability for installation or consequential damages.

Material selection

Choose non-combustible materials for panels/bricks with a thermal resistance greater
than 0.03 m xK/W. Thermal resistance is defined as the thickness (in m) divided by the
2
wall's lambda value. Consult with your installer/chimney sweep.
is sucked in at the base of the stove up through the convection
attika
RAIS/ - User manual for VISIO
Måltegning
VISIO 3
1249008 - Bagafgang
17 17